View Catalog Sheet
Buy Conveyor Online  Print
This Page
Model 25SR is used to carry heavy
pallets, packages & drums. Straight sections & curved sections
available.
- Sideframes: 4" deep x 4 Ga. formed steel powder painted.
- Standard sections come in lengths of
5' & 10' but a wide range of intermediate lengths
are available from 12" to 120". (Lengths must be divisible
by roller spacing)
- Standard overall frame widths: 16-1/4",
18-1/4", 20-1/4", 22-1/4",
24-1/4", 26-1/4", 28-1/4",
30-1/4", 34-1/4",
36-1/4", 40-1/4", 42-1/4" , 46-1/4", 50-1/4",
54-1/4", 58-1/4",
64-1/4" & 70-1/4" but custom widths available from
9-1/4" to 70-1/4".
- Rollers: 2-1/2" OD x 11 Ga. bare steel roller tubes with
11/16" hex bare steel axles spaced every 3", 4",
6", 8", or 12".
- Capacity-up to 630 lbs. per roller. (Refer to chart in catalogue sheets attached)
Model 26SR is similar but with heavier bare steel roller tubes.
- Standard overall frame widths: 16-1/4",
18-1/4", 20-1/4", 22-1/4",
24-1/4", 26-1/4", 28-1/4",
30-1/4", 34-1/4",
36-1/4", 40-1/4", 42-1/4" , 46-1/4", 50-1/4",
54-1/4", 58-1/4",
64-1/4" & 70-1/4" but custom widths available from
9-1/4" to 70-1/4".
- Rollers: 2-1/2" OD x 11 Ga. bare steel roller tubes with
11/16" hex bare steel axles spaced every 3", 4",
6", 8", or 12".
- Capacity-up to 630 lbs. per roller. (Refer to chart in catalogue sheets attached)
Specials available:
- Heavier bearings for loads over 630 lbs. per roller.
- Model 2514SR = 2-1/2" OD x 14 Ga. lighter bare steel roller
tubes with 7/16" hex axles & lighter frames similar to
the 20SR.
| Availability: |
 |
Shipment from
factory in 24-Hours |
|
Shipment from
factory in 24-Hours
Plus
Get Pricing & Shop Online |
|
