McKessock Conveyors Package Handling Systems  
McKessock Conveyor Solutions

Conveyor & System Accessories

Horizontals Inclines/Portables Accumulating Chain Driven Miscellaneous Gravity Accessories
Pop-Up O-Ring Transfer  |   CT-200/300/1500 Chain Transfer  |   BR-3000 Chain Transfer  |   CC-3000 Chain Transfer  |   ET-3000 Chain Transfer  |   High Speed Pusher & 50/50 Pusher  |   Overhead Push-Off  |   Powered Pivot Diverter  |   SC1 & SC2 Belt Sorter  |   ProSort 131, 221 & 231 Shoe Sorter  |   Supports  |   Package Stops  |   Guard Rails  |   Ball Transfer Tables  |   26-CRPT Turntable, Motor Rotated CDLR  |   LPTG19/LPTG25 Gravity Turntable  |   TC19/TC25 Transfer Car  |   Turning Wheel  |   Gates  |   Traffic Cop  |   Plow

Gates

View Catalog Sheet      Buy Gates Online      Print This Page

Manual Gate

Manual Gates are available for use with a variety of conveyors. Gates provide a passageway for personnel, lift trucks, and other equipment.

NOTE: Gate Hinge Assembly DOES NOT include conveyor or supports.

SKATEWHEEL & 1-3/8" ROLLER
  • 4 widths (12 in. to 24 in. OAW)
  • 3 ft., 4 ft., & 5 ft. lengths
  • Steel or aluminum, skatewheels or rollers
  • 2-1/2 in. x 1 in. channels - 12 ga. galvanized steel or .125 in. aluminum
  • Safety gate latch
 1.9" & 2.0" ROLLER
  • 12 widths (13 in. to 39 in. BR)*
  • 3 ft., 4 ft., & 5 ft. lengths *
  • 1.9 in. galvanized, unplated, or aluminum, or 2.0 in. unplated rollers
  • 10 ga. powder painted steel channels 3-1/2 in. x 1-1/2 in. (set high) or 4-1/2 in. x 1-1/2 in. (set low)
  • Safety gate latch
*NOTE: Maximum width and length determined by roller centers and type of roller. Inquire.

Spring Balanced Gate

Spring Balanced Gates can be used with several types of gravity wheel and roller conveyor. Gates provide a passageway for personnel, lift trucks, and other equipment. Tension springs are easily adjusted to provide minimum weight lift.

SKATEWHEEL & 1-3/8" ROLLER
  • 4 widths (12 in. to 24 in. OAW)
  • 3 ft., 4 ft., & 5 ft. lengths
  • Steel or aluminum, skatewheels or rollers
  • 2-1/2 in. x 1 in. channels–12 ga. galvanized steel or .125 in. aluminum
  • HD compression springs
  • Safety gate latch
  • Can be attached to 138-ACC conveyor

 1.9" & 2.0" ROLLER
  • 12 widths (13 in. to 39 in. BR)
  • 3 ft., 4 ft., & 5 ft. lengths (1.9 in. & 2.0 in.), 3 ft. & 4 ft. lengths (2.5 in.)
  • 1.9 in. galv., unplated or aluminum, or 2.0 in. unplated rollers–2.5 in. unplated rollers
  • 1.9 in. & 2.0 in. roller: 10 ga. powder painted steel channels, 3-1/2 in. x 1-1/2 in. (set high) or 4-1/2 in. x 1-1/2 in. (set low)–2.5 in. roller: 4 in. x 1-5/8 in. x 4 ga. powder painted steel channels (set high or set low)
  • HD compression springs
  • Safety gate latch
  • Can be attached to 190-LR, 190-ACC, & 190-ACZ conveyors


 

HOME | ABOUT US | INDUSTRIES | PRODUCTS | NEWS | DOWNLOADS | CONTACT US | ONLINE PRICING

McKessock Engineering Ltd.

7-138 Anderson Avenue, Markham, Ontario, Canada L6E 1A4
Phone: 800-978-0420, Fax: 905-471-6617
E-mail:

Copyright © McKessock Engineering Ltd. 2005-, all rights reserved.