Conveyor & System Accessories

Supports

View Catalog Sheet      Buy Supports Online      Print This Page

Stationary Floor Supports

Light Duty, Medium Duty, Heavy Duty FRAME - Welded frame assembly, powder painted with adjustable pivot plate and adjustable feet. Holes in feet for lagging to floor. OPTIONAL EQUIPMENT - Floor Locks, Knee Braces, Single Center Leg (LS or MS type only), Brake Casters (4 or 6 in. dia.) Available on swivel caster only. CASTERS - 4 or 6 in. dia., steel or rubber, includes necessary knee braces. Available in either swivel or rigid type. Note: For elevation information when using 4 or 6 in. dia. casters, contact us. CAPACITY - LS & MS 1500 lbs. each. HS 3000 lbs each.

Poly-Tier Supports

Poly-tier supports provide sturdy support for multi-level conveyor lines. Heights available from 36 in. to 120 in. in 6 in. increments. 1-1/2 in. I.D. (1.9 in O.D.) crosspipe assembly mounted to 1-3/4 in. x 4 in. x 7 ga. steel support legs. Capacity: 1500 lbs. per crosspipe–4500 lbs. per set of legs. Supplied for overall conveyor widths from 10 in. to 42 in. wide. Knee braces are supplied to provide extra stability to support. Conveyor Widths 10 in. to 42 in. Wide 36 in. to 120 in. Support Height Sturdy Support for Multi-level Lines Available for Most Horizontal Power and Gravity Conveyors Contact Us for Specific Application and Available Sizes

Ceiling Hangers

Ceiling Hangers provide safe and sturdy means of gaining high conveyor elevations. Used when maximum utilization of floor space is needed or when required height exceeds floor support capability. 5/8 in. fully threaded steel rod connects to 1-1/2 in. I.D. (1/9 in. O.D.) support which bolts to underside of conveyor with “U” brackets. Ceiling Hangers can be supplied with gravity or powered conveyors. It is recommended that guard rails be used on conveyors that are ceiling hung. 5/8 in. dia. x 8 ft. Long Unplated Fully Threaded Rod Sturdy Crosspipe Mounts to Underside of Bed Section Contact Us for Available Sizes

Portable Castered Supports & Portable Castered Curve Supports

Available in 12", 15", 18", & 24" Widths Portable Castered Support allows straight sections of gravity skatewheel or 1-3/8 in. dia. roller conveyor to be easily moved. Portable Castered Curve Support allows curved sections of gravity skatewheel or 1-3/8 in. dia. roller curves to be easily moved. Floor locks can be supplied–optional, see Page 167.

Tripod Stand

Adjustable Tripod Stands are used with straight or curved sections of gravity skatewheel and 1-3/8 in. dia. roller conveyor. Optional leg angles can be supplied to fasten stand to floor. Portable applications 4 widths Easily adjusted CAPACITY: 350 lbs. with 180 in./lbs. of torque on locking screw. (No Shock Loading).

Roller Stand

Adjustable Roller Stands are made of heavy gauge pipe with a 1.9 galvanized, ball bearing roller mounted on top. They are used for feeding work to a punch press, saw, drill press, brake press, or anywhere some extra support is required. Portable applications 3 widths Easily adjusted